E61 Shaker Redistribution Dosing Cup for ECM 64 Grinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The E61 Shaker Redistribution Dosing Cup perfectly fits beneath an ECM 64 Grinder. No funnel needed for clean grinding.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
There are two requirements I wanted to solve with the remix:
- Get rid of the uneven coffee distribution in E61 coffee compartments, which was the original use of the shaker cup, like described in the original print project.
- Grind for a multiple of regular espresso coffee shots for use in a normal filter machine or manual filtering. Obviously, a whole can of coffee needs some more coffee to be grinded… In parallel, get rid of the extra funnel I normally use for grinding with my ECM 64 grinder. So the height of the shaker cup had to be optimized to fit.
I had my difficulties in getting round edges on the baseplate of the shaker cup after cutting off the lower part of the original shaker cup. In the end, I had to create an extra Fusion360 body to successfully round the edges. This is not a groundbreaking work of remix. Nevertheless, I attached the Fusion360 sources.
Nothing special for the print settings. PET-G, 0.2mm layer height, no supports.
Have lots of good coffee!