ECM Synchronika chassis adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.13 – €0.16 net (excluding VAT)
For file: 15mm-ECM-Synnchronika v1_0.2mm_PETG_MK3S_3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 3.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
When using the drainage container kit, you need to unscrew a bolt and a nut from the drip tray. ECM Sychronika has alrea
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 4
- Views
- 559
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When using the drainage container kit, you need to unscrew a bolt and a nut from the drip tray. ECM Sychronika has already a 15mm hole in the chassis, but it's to large for these parts. This adaptor solves the problem.