ECM Classika Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.63 – €0.76 net (excluding VAT)
For file: ECM-Waterfilter-Adapter_0.6n_0.32mm_PETG_COREONE_27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.69 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 26.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you use waterfilters in the tank of an ECM Classika PID coffeemachine, e. g. Brita AquaAroma Crema or something similar, you need to buy an additional adapter.
I bought Filters from Waterdrop and printed the adapter with PETG.
Filters: https://www.amazon.de/dp/B07M5GK693
Hint:
If the bore is too tight use a 8mm drill to make it fit… I did not use the o-ring groove I designed for the model.