1 / 5
Cabinet/Drawer Knob for IKEA Kallax, with steel nut insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another cabinet/drawer knob for IKEA furniture.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 111
- Wydruki
- 4
- Wyświetlenia
- 867
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (50)Powiązane
Here is yet another cabinet/drawer knob for IKEA furniture, such as KALLAX.
The model was designed with space for a M4 inside. The print must be paused at the corresponding height to insert the steel nut. After that you can continue the print on top of the nut.
After you dropped in the steel nut plaese check if it sticks out at the top face. If it does stick out DON'T contiue the print to prevent damaging the nozzle!
The steel nuts which I used had a height of about 2,95 mm. The designed height of the emty space is 3.1 mm.