Voron 0.2 V0.2 Skirt Set Mesh Only
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional fine meshes to glue on to already printed regular V0.2 skirt pieces.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 576
- Wydruki
- 5
- Wyświetlenia
- 1859
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Note: If you want to print the V0.2 Skirts with fine mesh, I recommend doing it in one go and print these: https://www.printables.com/de/model/364526-voron-v02-meshed-skirt-set
If you have already printed the original Voron V0.2 skirt pieces and want to add the fine meshes to them, just print this set without any top and bottom layers and infill type and density as you like. The parts are then glued to the inside of the existing skirt pieces.
You want to mirror half of the front and side pieces for an identical finish or just print all as is ;)
---
Please share a Make if you print one of these and as always: Enjoy!