1 / 4
[Euro Pegboard] osVAC neo Holder F32 and M32
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pegboard holder for osVac accessories.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
A pegboard holder for osVac accessories. M32 and F32. I've increased the clearance so that the parts slide more easily in.
You will also need 2 M5x6 SHCS.
Screw the screws in the holes on the back side. Adjust the depth of the screws so that the friction with the pegboard is just right (= good amount of friction but moveable).