1 / 3
Wallmount UNI USB-C 8 in 1 Hub
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple design to free some usable space on your desk and prevent unmanaged cables from spreading all over it.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Made for this Hub
Mount it either with some doublesided Tape (Attention this could damage the paint if you take it off again) or use the holes to screw it in (obviously that will leave holes in your wall if you take it off again).
I modified mine with two 40mm x 40mm heatsinks because I noticed that it can get pretty hot, when in constant use.
I printed it in PLA with supports, probably it would work without as well, I would be happy to read your experiences.