Sensitive tape holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can hold any type of roll with 50mm(outer diameter) and 25mm(inner diameter) Intended for first aid or medikit
- Ocena
- 4,75 / 5
- Polubienia
- 89
- Pobrania
- 329
- Wydruki
- 4
- Wyświetlenia
- 1251
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
It is designed to hold a spool of sensitive tape and has a handy toothed area for ripping the tape. It seems that a 0.2mm layer hight works best to generate sharp edges. 0.25 and higer dulls them to much to be of any help anymore.
Note: First i made them out of ABS to make the latches in the middle more flexible, but i found out that the teeth out of ABS are rather quickly worn out by tape with a high fiber content.
PLA seems the better choice therefore. Wouldn't have expected that
I derived this roller by printing this one first:
https://www.printables.com/de/model/74372-sensitive-tape-support
Unfortunatelly, it didnt survive to long because the middle section disintegrated while using. This might not be the designs fault, cause i printed it very fast out of ABS. But to tacle this in the first place, i designed one with thicker latches and made it a little biger in general