Sensitive tape holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can hold any type of roll with 50mm(outer diameter) and 25mm(inner diameter) Intended for first aid or medikit
- Rating
- 4.75 / 5
- Likes
- 89
- Downloads
- 329
- Makes
- 4
- Views
- 1,251
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
It is designed to hold a spool of sensitive tape and has a handy toothed area for ripping the tape. It seems that a 0.2mm layer hight works best to generate sharp edges. 0.25 and higer dulls them to much to be of any help anymore.
Note: First i made them out of ABS to make the latches in the middle more flexible, but i found out that the teeth out of ABS are rather quickly worn out by tape with a high fiber content.
PLA seems the better choice therefore. Wouldn't have expected that
I derived this roller by printing this one first:
https://www.printables.com/de/model/74372-sensitive-tape-support
Unfortunatelly, it didnt survive to long because the middle section disintegrated while using. This might not be the designs fault, cause i printed it very fast out of ABS. But to tacle this in the first place, i designed one with thicker latches and made it a little biger in general