Eurobox/Gridfinity Insert for Panasonic FZ1000
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an insert for my Eurobox/Gridfinity transportation system to contain the Panasonic FZ1000
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 1030
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an insert for my Eurobox/Gridfinity-Transportation-System to accomodate the Panasonic FZ1000, some (micro-)-SD-cards and a spare battery.
It is 3.5 x 3.5 Gridfinity-units in size. I cut out the corners from this square to make more room in the eurobox for other containers.
Due to the height of the camera, I had to cut into the bottom of the container which leads to a little awkward appearance - but it works as intended.
Below the viewfinder is a compartment for a spare battery and on the side of the lens is a small holder for a few SD- and micro-SD-cards. I guess this makes good use of the available space.
Printing is straight forward. I used PLA in this case.
UPDATE 18. Apr. 2023: uploaded a flat bottomed version of the container (as per request in the comments). It should work, but I did not print it myself.