Eurobox/Gridfinity Insert for Panasonic FZ1000
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an insert for my Eurobox/Gridfinity transportation system to contain the Panasonic FZ1000
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 36
- Makes
- 0
- Views
- 1,030
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is an insert for my Eurobox/Gridfinity-Transportation-System to accomodate the Panasonic FZ1000, some (micro-)-SD-cards and a spare battery.
It is 3.5 x 3.5 Gridfinity-units in size. I cut out the corners from this square to make more room in the eurobox for other containers.
Due to the height of the camera, I had to cut into the bottom of the container which leads to a little awkward appearance - but it works as intended.
Below the viewfinder is a compartment for a spare battery and on the side of the lens is a small holder for a few SD- and micro-SD-cards. I guess this makes good use of the available space.
Printing is straight forward. I used PLA in this case.
UPDATE 18. Apr. 2023: uploaded a flat bottomed version of the container (as per request in the comments). It should work, but I did not print it myself.