1 / 2
Proxxon FBS 240 shaft bearing extractor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for replacement of the bearing
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 586
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Step 1: remove bearing c clip
Step 2: slide (part 1) behind the bearing
Step 3: put the U plate (part 2) right behind the bearing
Step 3.5 make sure to oil the screw threads and that they work smoothly before trying to extract the bearing
Step 4: align the screw (part 3) on the shaft and pull (part 1) along with the U plate and the bearing
printed in petg, use 0.15mm layers for best thread quality