1 / 6
RockPro64 Case (passive cooling)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional Material: 4 x M3 black hex brass spacer screws for the feed Notes I included the source file The pictures…
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 173
- Wydruki
- 3
- Wyświetlenia
- 1253
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Additional Material:
4 x M3 black hex brass spacer screws for the feed
NotesI included the source file
- The pictures from the finished print are unprocessed, no sanding - nothing.
- Pictures are very bad quality since it is hard to make a good picture when all components are pitch black.
Print instructions
Category: Electronics Summary
Additional Material:
4 x M3 black hex brass spacer screws for the feed
NotesI included the source file
- The pictures from the finished print are unprocessed, no sanding - nothing.
- Pictures are very bad quality since it is hard to make a good picture when all components are pitch black.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: .3
Infill: 20%
Filament: any PLA Black
Notes:
- Optimized for .3 mm layer height and a .4 mm nozzle.
- It is a tight fit so you need to bend the case a little to get the board in.