1 / 6
RockPro64 Case (passive cooling)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Additional Material: 4 x M3 black hex brass spacer screws for the feed Notes I included the source file The pictures…
- Rating
- 4 / 5
- Likes
- 7
- Downloads
- 173
- Makes
- 3
- Views
- 1,253
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Additional Material:
4 x M3 black hex brass spacer screws for the feed
NotesI included the source file
- The pictures from the finished print are unprocessed, no sanding - nothing.
- Pictures are very bad quality since it is hard to make a good picture when all components are pitch black.
Print instructions
Category: Electronics Summary
Additional Material:
4 x M3 black hex brass spacer screws for the feed
NotesI included the source file
- The pictures from the finished print are unprocessed, no sanding - nothing.
- Pictures are very bad quality since it is hard to make a good picture when all components are pitch black.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: .3
Infill: 20%
Filament: any PLA Black
Notes:
- Optimized for .3 mm layer height and a .4 mm nozzle.
- It is a tight fit so you need to bend the case a little to get the board in.