Headband Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headband holder that is customizable based on length of dowels used. Printable on the Prusa Mini.
- Ocena
- 4,667 / 5
- Polubienia
- 53
- Pobrania
- 235
- Wydruki
- 3
- Wyświetlenia
- 2189
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
I was looking around for a design for a headband holder to store headbands. I found this one on Amazon:
https://www.amazon.com/Headband-Organizer-Acrylic-Display-Hairband/dp/B09B2QDSZ9?ref_=ast_slp_dp
I figured that I could use this as an opportunity to work with Fusion360 and try my hand at modeling something that I could print. I was able to get it modeled and modified to fit on my Prusa Mini and then got two pieces printed. I decided to use wooden dowels and some small #4 screws to keep it relatively cheap and easy to put together. I ended up using these dowels and screws, but any ¼" dowel and shorter #4 screw should work:
https://www.homedepot.com/p/6404U-1-4-in-x-1-4-in-x-48-in-Raw-Round-Dowel-10001800/203334060
I also will include the Fusion360 file if anyone wants to modify the design in anyway, as well as the STL that I used.
Once the pieces were printed, I cut the dowels to 12" and then inserted them into the model, which has some friction fit and may hold together on its own. I then pre drilled each dowel and got a screw put in each one. It ended up working quite well.