Headband Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Headband holder that is customizable based on length of dowels used. Printable on the Prusa Mini.
- Rating
- 4.667 / 5
- Likes
- 54
- Downloads
- 235
- Makes
- 3
- Views
- 2,195
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Public Domain
I was looking around for a design for a headband holder to store headbands. I found this one on Amazon:
https://www.amazon.com/Headband-Organizer-Acrylic-Display-Hairband/dp/B09B2QDSZ9?ref_=ast_slp_dp
I figured that I could use this as an opportunity to work with Fusion360 and try my hand at modeling something that I could print. I was able to get it modeled and modified to fit on my Prusa Mini and then got two pieces printed. I decided to use wooden dowels and some small #4 screws to keep it relatively cheap and easy to put together. I ended up using these dowels and screws, but any ¼" dowel and shorter #4 screw should work:
https://www.homedepot.com/p/6404U-1-4-in-x-1-4-in-x-48-in-Raw-Round-Dowel-10001800/203334060
I also will include the Fusion360 file if anyone wants to modify the design in anyway, as well as the STL that I used.
Once the pieces were printed, I cut the dowels to 12" and then inserted them into the model, which has some friction fit and may hold together on its own. I then pre drilled each dowel and got a screw put in each one. It ended up working quite well.