Multipurpose Jig Fence
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small fence for various woodworking jigs and fixtures
- Ocena
- 5 / 5
- Polubienia
- 152
- Pobrania
- 459
- Wydruki
- 1
- Wyświetlenia
- 2856
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I set out to make a “Wedgie” sled for segmented turning but realized I already had made this sled based on the plans that came with the Microjig Zeroplay 360 Sled Kit. instead of cutting, gluing, and routing slots in some janky scrap plywood, I decided to make the fences using my 3d printer. The fences can be oriented in any position, any angle, and can work with a variety of mounting options.
The fence measures 11" long, 1" wide, and .8" tall. The center slot is slightly oversized to accomodate ¼-20 hardware if you choose to print your own dovetail slot hardware. (Microjig hardware is 10/32")
The fence is slightly too large for an Ender 3 Pro size bed, but will fit at 98% scale on the diagonal.