Generic action camera to tripod adapter screw-in
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V1 the sketch was not correctly defined No reason to not use V2
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
V1 the sketch was not correctly defined
No reason to not use V2
Print Settings
Printer:
Kingroon KP3S
Rafts:
No
Supports:
No
Resolution:
0.12mm
Infill:
80%
Notes:
I used PLA as the material, but it should not matter what type of material you use. It is important to note that you should use a lot of walls or not forcefully screw it on, otherwise it may snap off. If a screw breaks off inside the action camera, you can heat a flathead screwdriver and melt the plastic just enough to rotate it out of the camera.
Software
I used Blender and the CAD Sketcher add-on.
I used Bolt Factory (If it would have been available when I designed this I would have probably used this Precision Bolts add-on "") blender add-on to create the threads it screws into.Designing
I measured where I put the adapter then added a screw on-top and centered it so some of the action cameras weight is put onto the plastic body of the tripod which is why there is no weight alleviation in the design.
I use "https://imagy.app/resize-image-to-500kb" to get the images to the size required in order to upload them.
Category: Accessories