Lamp Shade in Clear PETG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had this basic bulb display block.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 2213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
I had this basic bulb display block. It was originally used to display a classic Edison Bulb, but I have been using it for a Phillips Hue multi color bulb as a night light. I finally got my Prusa i3 MK3S and wanted to play with some of the "New Fangled" fibers. My old printer couldn't do the temps required for PETG, and it didn't have a heated build plate. What you are looking at here is my first attempt, and I was pretty impressed. The settings are default using Prusa's settings for Generic PETG. I printed it in Vase mode, and used a cheap roll of clear PETG from Inland. I was amazed. This has no post print adjustments at all! I included my G-Code that I used to make this print.
I may have to give it a try with some Clear ASA/ABS and see how it looks after vapor smoothing.
WARNING!! Be sure to only use with a low wattage LED bulb. This is not vented and there is a clear possibility of fire. Use this at you own risk.