Free2K Adapter For Artisan Keycaps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clone of the L2K concept by Artisan Alliance. I made this because I wasn't able to buy from their store.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 830
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is a clone of the L2K concept by Artisan Alliance. I made this because I wasn't able to order their part through Shapeways and the designer didn't make the 3D file available for those with 3D printers. I whipped this design up in a few minutes in TinkerCad using a Cherry MX Stem design and a generic LEGO plate found in STL format.
I have printed this on both a FDM and SLA printer with success, I have shrunk the stem to better fit the Keycap without a risk of it breaking off in the keycap. If you find that the stem is too tight, I would suggest using a small nail file on the stem to make it fit accordingly.
I put a flat on one corner to help with keying you molds for orientation.
Remember to use LOTS of mold release!
Print Settings
Printer:
Artillery Sidewinder, Voxelab Proxima
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
3D Solutech PLA, Washable Resin
Notes:
Don't print with a raft, you may need to sand the bottom to make it flat and flush.
Category: Art Tools