CNC Pen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of a common type of pen holder for CNC mills. No need to remove your router/spindle as this will fit in the…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 1626
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
My version of a common type of pen holder for CNC mills. No need to remove your router/spindle as this will fit in the collet. Will work with different diameter pens.
Currently two versions, one for a 1/4" shank and the other for a 1/8" shank.
Print Settings
Printer:
M2
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
.2
Notes:
I tried a couple different orientations, and it prints pretty well without supports.
Supplies
Aluminum (or other) rod with shank diameter, cut to length.
Two shaft collars for rod.
Compression spring - I used a 7/32" for the 1/8" shank and a 3/8" for 1/4"
A couple of M3 screws to secure pen.
Category: Machine Tools