Lemon Keychain (snap-in design)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was my son's request for a lemonade stand. I couldn't find what he wanted, and so this tinker was born.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Recommended print setting:
layer height ≤ 0.2
perimeters = 3
supports/brim: none (don't worry if “lemon skin” doesn't print perfect, it should not affect end result after assembly)
infill: doesn't matter (use at least 4-5 top/bottom layers)
Assembly:
As easy as A→B→C!
Please note, it's designed for a tight fit so as not to require any gluing after printing. The usual disclaimer: if printer tolerances are sufficiently different, you may need to scale one or more parts accordingly.
Extra tips:
Try it in glow in the dark filament (pictured), because who doesn't like radioactive lemons?
Scale up for a coaster (use “no hole” STL for part A) or make an orange slice!