Lemon Keychain (snap-in design)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was my son's request for a lemonade stand. I couldn't find what he wanted, and so this tinker was born.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 106
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Recommended print setting:
layer height ≤ 0.2
perimeters = 3
supports/brim: none (don't worry if “lemon skin” doesn't print perfect, it should not affect end result after assembly)
infill: doesn't matter (use at least 4-5 top/bottom layers)
Assembly:
As easy as A→B→C!
Please note, it's designed for a tight fit so as not to require any gluing after printing. The usual disclaimer: if printer tolerances are sufficiently different, you may need to scale one or more parts accordingly.
Extra tips:
Try it in glow in the dark filament (pictured), because who doesn't like radioactive lemons?
Scale up for a coaster (use “no hole” STL for part A) or make an orange slice!