Raspberry Pi 4 case (RPi4 + Waveshare PoE HAT + PiJuice for HomeAssistant)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another Raspberry Pi case designed for projects using up to two hats.
- Ocena
- 4,5 / 5
- Polubienia
- 63
- Pobrania
- 366
- Wydruki
- 3
- Wyświetlenia
- 3951
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is included which makes it easy for you to adjust the case to your own projects.
I printed sides from PLA and the frame and slider (RPi holder) are from PETG. I recommend PETG for the slider because the CPU is pretty hot.
To print this you will need all non-slider parts and pick one of the sliders.
- rpi_ha_case_slider_passthrough.amf - passthrough holes needed for PiJuice (you will need 4x 10+mm 2.5mm screws)
- rpi_ha_case_slider4screws.amf - standard holes where 4x 2.5mm screws fit
- Sides are screwed by 4x 3x10+ mm screws
The logo from the photo is not part of this model. I took it from here and glued it:
https://www.printables.com/model/192581-home-assistant-logo