Biqu H2 Mount for Biqu B1 with stability bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of Biqu's original H2 mount for the latest B1, with an added bar for improved stability.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 276
- Wydruki
- 1
- Wyświetlenia
- 1555
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I personally found that the high mounting point of the official Biqu mount resulted in a fair amount of flex, causing layer shift on the y-axis, inconsistent prints, and the extruder head to occasionally hit the model during travel moves.
This design very simply adds a “stability bar” at the bottom of the mount, which hooks onto the pulley and ensures that there is no flex in the mounting plate.
For me this simple mod immediately resulted in significantly improved prints (no layer shift and no hitting the model when travelling), so if you're having print quality issues and think that it's due to flex in the mount, then this could help you out.
Note: this is for the latest version of the Biqu B1 and not the original version - the position of the mounting holes differs between the two versions. The original Biqu H2 mount for the latest Biqu B1 (on which this “remix” is based) can be found at:
It can be a bit tricky to get the right angle to fit the mount (you need to slide the stability bar behind the pulley at the bottom first) but as soon as you get it right the mount fits without having to force it at all.