FlashForge Dreamer: Lid Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rises Dreamer's lid 7mm.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The corners can be either clipped on or secured with M3-0.5 x 20 mm socket head machine screws. I have them secured. If you decide to secure them, you need to buy the screws, but no new screw holes are necessary: the screws will use existing holes and nuts. The front piece is optional and it has to be secured.
These were inspired by Baron Williams, but this is not a remix of his version: https://www.thingiverse.com/thing:667599
If you have an older FlashForge Dreamer with a “frosted” front door and no rear case fans, you will get better fitment using his version. For a newer Dreamer with a clear front door, mine should fit better.
How I Printed:
Notice the springs at the bottom of the corners: support is needed for the layers above the voids.