FlashForge Dreamer: Lid Risers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rises Dreamer's lid 7mm.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 89
- Makes
- 0
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
The corners can be either clipped on or secured with M3-0.5 x 20 mm socket head machine screws. I have them secured. If you decide to secure them, you need to buy the screws, but no new screw holes are necessary: the screws will use existing holes and nuts. The front piece is optional and it has to be secured.
These were inspired by Baron Williams, but this is not a remix of his version: https://www.thingiverse.com/thing:667599
If you have an older FlashForge Dreamer with a “frosted” front door and no rear case fans, you will get better fitment using his version. For a newer Dreamer with a clear front door, mine should fit better.
How I Printed:
Notice the springs at the bottom of the corners: support is needed for the layers above the voids.