2x830 Point Breadboard Tray for ESP32 Development
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple tray for 2x 830 point breadboards, with spacing between to allow spanning an ESP32 board.
- Ocena
- 4 / 5
- Polubienia
- 36
- Pobrania
- 231
- Wydruki
- 4
- Wyświetlenia
- 1324
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Fits two 830 point breadboards with spacing to allow an ESP32 dev board to span between them, solving the problem with those boards not fitting common breadboards with any points to spare.
As designed it works perfectly for Elegoo brand boards, but likely works with other 830 point commodity boards, or feel free to adjust the parameters in the OpenSCAD source, they should be easy to understand.
Holes through the middle are just for looks and material reduction, but also ends up being a handy place to drop components while you're working.