FGC-6 MKI/MKII: UNW 163, 227, 300, 370 SLIM Outer barrels set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2023 version of the outer barrels
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
02-06-2025
UNW-T6 outer barrel options added
---
as part of the big V24 update. the 14mmccw barrels have been made a bit stronger
-
14mm CWW barrel tips have been added ---
these are the 2023 versions of the Outer barels for the FGC6 MKI/MKII (s, FA, H) platform. this barrel will have a tighter Inner diameter size at the tip of the barrel. this will act like a inner barrel stabiliser so in other words it prevent it form moving around.
but before you select and print a outer barrel. make sure that your FGC6 is working correctly. and take a close look at the barrel adapter that you use.
the file naming works as fallows:
227 slim barrel 00mm 9 18mmID
(227 slim = shroud model) (barrel = what type of barrel) (00mm = inner barrel hight) (9 18mmID = inner barrel OD size)
-
this outer barrel is made to work with the fallowing models:
for the FGC-6 MKI
FGC9-MKI UNW163 SLIM shroud or for the FGC6 MKI
https://www.printables.com/model/289957-fgc9-mki-unw163-slim-shroud-or-for-the-fgc6-mki
FGC9-MKI UNW270 SLIM shroud or for the FGC6 MKI
https://www.printables.com/model/289551-fgc9-mki-unw270-slim-shroud-or-for-the-fgc6-mki
for the FGC-6 MKII
FGC9-MKIISD UNW227 SLIM shroud (model C will fit, but will not support the barrel)
https://www.printables.com/model/238242-fgc9-mkiisd-unw227-slim-shroud
FGC9-MKIISD UNW300 SLIM shroud or for the FGC6 MKII (model C will fit, but will not support the barrel)
https://www.printables.com/model/240140-fgc9-mkiisd-unw300-slim-shroud-or-for-the-fgc6-mki
FGC9-MKIISD UNW370 SLIM shroud or for the FGC6 MKII
https://www.printables.com/model/288158-fgc9-mkiisd-unw370-slim-shroud-or-for-the-fgc6-mki
-
materials needed:
shroud
4x M3 washer
4x bolt m3 35mm or 40mm long
suppressor
2x bolt m2,5 18mm or 20mm long
3 piece barrel
1x M3 16mm long
-
print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…