1 / 2
FGC-6 MKI/MKII: UNW 163, 227, 300, 370 SLIM Outer barrels set — image 1
1 / 2

FGC-6 MKI/MKII: UNW 163, 227, 300, 370 SLIM Outer barrels set

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

2023 version of the outer barrels

Rating
0 / 5
Likes
6
Downloads
57
Makes
0
Views
382
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

02-06-2025

UNW-T6 outer barrel options added

---

as part of the big V24 update. the 14mmccw barrels have been made a bit stronger

 

-

14mm CWW barrel tips have been added ---

 

these are the 2023 versions of the Outer barels for the FGC6 MKI/MKII (s, FA, H) platform. this barrel will have a tighter Inner diameter size at the tip of the barrel. this will act like a inner barrel stabiliser so in other words it prevent it form moving around.

but before you select and print a outer barrel. make sure that your FGC6 is working correctly. and take a close look at the barrel adapter that you use.

the file naming works as fallows: 
227 slim barrel 00mm 9 18mmID
(227 slim = shroud model) (barrel = what type of barrel) (00mm = inner barrel hight) (9 18mmID = inner barrel OD size)

-

this outer barrel is made to work with the fallowing models:
for the FGC-6 MKI
FGC9-MKI UNW163 SLIM shroud or for the FGC6 MKI
https://www.printables.com/model/289957-fgc9-mki-unw163-slim-shroud-or-for-the-fgc6-mki

FGC9-MKI UNW270 SLIM shroud or for the FGC6 MKI
https://www.printables.com/model/289551-fgc9-mki-unw270-slim-shroud-or-for-the-fgc6-mki

for the FGC-6 MKII
FGC9-MKIISD UNW227 SLIM shroud (model C will fit, but will not support the barrel)
https://www.printables.com/model/238242-fgc9-mkiisd-unw227-slim-shroud

FGC9-MKIISD UNW300 SLIM shroud or for the FGC6 MKII (model C will fit, but will not support the barrel)
https://www.printables.com/model/240140-fgc9-mkiisd-unw300-slim-shroud-or-for-the-fgc6-mki

FGC9-MKIISD UNW370 SLIM shroud or for the FGC6 MKII
https://www.printables.com/model/288158-fgc9-mkiisd-unw370-slim-shroud-or-for-the-fgc6-mki

-

materials needed:
shroud
4x M3 washer
4x bolt m3 35mm or 40mm long

suppressor 
2x bolt m2,5 18mm or 20mm long

3 piece barrel
1x M3 16mm long

-

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

Tags