Gridfinity Window Bins - 2x Tall, 2x Deep
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity based window bins that don't require tape, including multiple section, 2x tallx and 2x deep versions.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 210
- Wydruki
- 3
- Wyświetlenia
- 1059
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Version of the Gridfinity window bins modified to:
- Not require any tape, slides are held in place via rails and caps
- Close the gap between the caps and the side walls
- Have 2x deep versions
- Have 2x tall (2 stacked microscope slides) versions
Caps stay in place decently, but a little superglue on the seam will lock it in. Included a tall cap if you don't want to use two slides for the tall bins.
For reference, the slides I've used are 25mm x 75mm x 1mm. That should be standard, but obviously variances occur.
Combined .step & f3d file for your remixing pleasure or if you want to chase tolerances.
Edit 2/22/23: Turns out the slides I have were a bit off of the standard size. Uploaded new models of the caps to hopefully allow more vertical clearance.