Gridfinity Window Bins - 2x Tall, 2x Deep
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity based window bins that don't require tape, including multiple section, 2x tallx and 2x deep versions.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 210
- Makes
- 3
- Views
- 1,059
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Version of the Gridfinity window bins modified to:
- Not require any tape, slides are held in place via rails and caps
- Close the gap between the caps and the side walls
- Have 2x deep versions
- Have 2x tall (2 stacked microscope slides) versions
Caps stay in place decently, but a little superglue on the seam will lock it in. Included a tall cap if you don't want to use two slides for the tall bins.
For reference, the slides I've used are 25mm x 75mm x 1mm. That should be standard, but obviously variances occur.
Combined .step & f3d file for your remixing pleasure or if you want to chase tolerances.
Edit 2/22/23: Turns out the slides I have were a bit off of the standard size. Uploaded new models of the caps to hopefully allow more vertical clearance.