HSW bling, aka vase mode insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fast and cheap vase mode insert for the Honeycomb Storage Wall that can be used to bling out your wall!
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 1054
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Honeycomb storage wall bling, is that even a thing?! It is now! Coming in at only 1.7g of filament and 8min print time and promising a satisfying yet easy print, this vase mode honeycomb wall insert is painless to print and really fun to play with!
There two really important print configurations to get this working:
- Print in vase mode
- Set number of bottom layers to a number that results in a 2.4mm bottom shell (i.e. 12 layers for 0.2mm layer height)
I printed these with PLA+ (Fusion Filaments HTPLA+, to be exact) with a 0.4mm nozzle (0.45mm extrusion width - default for PrusaSlicer) and 0.2mm layer height. The resulting inserts have a nice snap feel, minimal wiggle, are easy to pop out, and have withstood multiple reconfigurations.
Works great with PLA also!
Please post your experience with other filaments and configurations!