Fokoos Odin-5 F3 Right Angle T-Slot Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter adds a t-slot to the front of the top supporting 20x20mm aluminum extrusion
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is my first design using OnShape! I recently bought the Fokoos Odin-5 F3 and wanted to use the same filament guide I use for my Ender 3 V2. The front of the top extrusion is completely flat. While this looks nice, it is not functional. I created this adapter to add a slot to the front of the top bar. The installation is pretty easy. Just remove the top two screws attaching the top bar to one of the horizontal extrusions. It just slides in and you can replace the screws. I recommend raising the print head up near the top to prevent any z-alignment issues when removing the screws.
I designed this part to be printed without supports.
Filament: PLA 1.75mm
Layer height: 0.2mm
Perimeters: 3
Solid layers (Bottom/Top): 3
Infill density: 18%