Schalthülse Weiler Condor VS1 /switching bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this bushing is turning the hexagonal switch beam when the machine is switched left / right / off by the main lever.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
this bushing is turning the hexagonal switch beam when the machine is switched left / right / off by the main lever. It is spring loaded and should be made of tough material with 100% infill, I recommend. After the print you should file the inner hexagon so it easily moves without radial play or a high force. On my machine I replaced the worn out original by this 3D part and it works since a few years. But as it has a safety impact if the machine might not stop if this part brakes - be careful…
Should print easily without support upright on the bed.