Schalthülse Weiler Condor VS1 /switching bushing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this bushing is turning the hexagonal switch beam when the machine is switched left / right / off by the main lever.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
this bushing is turning the hexagonal switch beam when the machine is switched left / right / off by the main lever. It is spring loaded and should be made of tough material with 100% infill, I recommend. After the print you should file the inner hexagon so it easily moves without radial play or a high force. On my machine I replaced the worn out original by this 3D part and it works since a few years. But as it has a safety impact if the machine might not stop if this part brakes - be careful…
Should print easily without support upright on the bed.