1 / 4
Combined Cable/Bowden Tube Swivel and X Axis Limit Switch Cover for Ender 3 v2 — zdjęcie 1
1 / 4

Combined Cable/Bowden Tube Swivel and X Axis Limit Switch Cover for Ender 3 v2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Combined X Axis Cover/Swivel for the Ender 3, allows front mounting the Cable/Bowden Tube for reverse bowden setups,

Ocena
4,889 / 5
Polubienia
59
Pobrania
288
Wydruki
10
Wyświetlenia
1924
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I am converting my Ender 3 v2 to direct drive, using a Micro Swiss NG.  I have decided to do a reverse bowden setup with the bowden tube running all the way to my Sunlu S2 filament dryer.

Originally, I kept the same wire and bowden tube routing of the unmodified Ender 3 v2.  But instead of just zip tying the cable/bownen tube bundle to the frame where the entruder was previously mounted, I designed a swivel, that would allow the bundle to gently rock back and forth as the print head moved from x=0 to x=220.

This setup (like the original Ender 3 v2) doesn't comfortably allow for the x gantry to reach the maximum allowable height of 250mm.  After I posted my design to reddit, a user name balthizar suggested I could have mounted the swivel to the x axis limit cover and get the cable/bowden tube out from under the top of the frame.  That was a great idea.  So I have delivered.

Moving from the extruder to the x axis limit switch cover does add distance to the cable run and bowden tube.  I am using a full length Capricorn tube.  I had to move the wire bundle from routing out the back to routing out the side.  I moved down where the extruder wire comes out from the bundle.  All in all, it does fit comfortably and its really nice seeing the x gantry at z=250mm moving side to side without any cables rubbing.

I printed it al 0.16mm layer height, but 0.20mm should work as well.  Obviously you need supports.  I highly recommend the Cura Christmas Alpha version that includes the new tree supports.  They detach really well.  Its printed in 1 piece, with the side that touches the x axis gantry down on the build plate.

Tagi