1 / 4
CHEAPEST FILAMENT DRYER - Food Dehydrator/Filament Dryer - Filament Spool Holder (w/ 608 Bearing) — zdjęcie 1
1 / 4

CHEAPEST FILAMENT DRYER - Food Dehydrator/Filament Dryer - Filament Spool Holder (w/ 608 Bearing)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed so you can fit your filament spool inside a generic food dehydrator, allowing for a frictionless unspooling

Ocena
0 / 5
Polubienia
23
Pobrania
100
Wydruki
0
Wyświetlenia
1672
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I designed this to allow me to use quite inexpensive food dehydrators (bought this for 10€) as an effective filament dryer. 

This part, printed in PETG gets screwed directly to the base, then makes use of a 608 generic bearing to allow for frictionless unspooling of the filament, to allow feeding directly to the printer.

I decided to print this in two pieces, so you can easily remix or modify the top part to allow it to work with any spool. (Currently tested with eSun, sunlu, Eryone, GST, Bambu Spools, without problem!).

For directly feeding the filament to the printer, just use a M6 coupler, screw it in the plastic case and fit in a PTFE tube up to the printer.

This is the cheapest solution for filament dryer.

Tagi