EdgeSwitch 8XP Hanging Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Getting more of the hardware off the valuable table space.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is specific to my workstation's “hutch” but may fit others w/ a 21mm or thinner back board. Print off both end pieces (the top and bottom are different) and 2 of the hangers. The hangers need supports, but maybe I can get time to figure out a way around it. Thanks to Cyberguyen on Thingiverse for providing the end cap design.
I'd originally planned to put this switch in the attic (these have a high operating temp rating) to reduce the number of keystone jacks in the wall, but that's not likely to happen now.
I'm using this item https://www.printables.com/model/330056-rj45-bad-port-indicator-cover to keep dust out of the unused ports.
When I find a USB-A cover I like, I'll add it here.