NodeMCU ESP32 Devkit V1 with DHT11 Sensor Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NodeMCU ESP32 Devkit V1 with DHT11 Sensor Case with ventilation to minimize temperature interference from the NodeMCU.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 394
- Wydruki
- 0
- Wyświetlenia
- 2789
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my rendition of a case with lid for the ESP32 Devkit V1 NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32 Devkit V1 board, and also a squeezed fit for the DHT11 sensor. Also, enough space has been allowed to make use of Dupont cables inside the case. Small air-vents will also ensure the ESP32 Devkit V1 NodeMCU board stays as cool as possible to not have interference with the DHT11 sensor module.
I make use of this design for all my ESP32 Devkit V1 boards with DHT11 sensors throughout my home. ESP32 Devkit V1 configured for use in Home Assistant using ESPhome.