Bambu Labs P1P/X1 Side Mount spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a heavy duty side mount holder.. so I adapted one to my likings.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 367
- Wydruki
- 2
- Wyświetlenia
- 3555
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SO this model of mine came from the linked original. I decided remove the ridges along the bottom so it would sit flat and be easier for everyone to print. I then also cut the model apart and made it turn 90 degrees so a 1kg spool can hang on the side without the need for extra space. ptfe tube isn't needed to make this work however I decided to add a piece myself. You'll need some longer bolts and nuts to mount the OEM holder to the relocation bracket. you'll also need some longer bolts to secure the bracket to the frame. I had a handful of longer bolts here so it wasn't an issue for me. Should be m3x25mm long. along with 2 m3 nuts.