1 / 1
Dust Shoe Bushing for Daedalus NL330 and HuanYang 80mm Spindle — zdjęcie 1

Dust Shoe Bushing for Daedalus NL330 and HuanYang 80mm Spindle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this for Daedalus NL330 and HuanYang 80mm Spindle to allow the dust boot to clear the Z-Axis.

Ocena
0 / 5
Polubienia
1
Pobrania
21
Wydruki
0
Wyświetlenia
204
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Print in PETG with 4 walls, 0.2mm layer height, infill should be 30% or so to avoid crushing.

The model should load and print as oriented. 

No supports needed. 

 

Tagi