1 / 2
Electro-Voice ND Series Grip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement hand grip for Elecrto-Voice ND Series microphones
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement for the part Electro-Voice F.01U.110.24. They are common on the ND series microphones. They also commonly crack and break over time.
If you intend to use this hand-held, it probably should be printed in a softer filament. I've printed mine in PETG as they will be stand mounted only.
The fit is very tight on the microphone. I sanded the inside down a fraction using some rolled up sand paper for the perfect fit. Better that it's too tight than too loose.