Opel Wheel Nut Cap 320mm long 17mm wide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I measured the caps on my Astra 18" wheels and they are much longer than the original design, 320mm long and 17mm…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 663
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I measured the caps on my Astra 18" wheels and they are much longer than the original design, 320mm long and 17mm wide, so I cut the original half and expanded it so that the inner shims will start at the same point.
I will try to print these with the outside side down and the hole up as I think it makes more sense since they are so long and they would need a lot of support material otherwise.
In order for this to be usable, it might be required to print them with a high layer adhesion material like nylon as other materials will split when you try to pull them out.
Category: Automotive