Opel Wheel Nut Cap 320mm long 17mm wide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I measured the caps on my Astra 18" wheels and they are much longer than the original design, 320mm long and 17mm…
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 190
- Makes
- 0
- Views
- 664
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I measured the caps on my Astra 18" wheels and they are much longer than the original design, 320mm long and 17mm wide, so I cut the original half and expanded it so that the inner shims will start at the same point.
I will try to print these with the outside side down and the hole up as I think it makes more sense since they are so long and they would need a lot of support material otherwise.
In order for this to be usable, it might be required to print them with a high layer adhesion material like nylon as other materials will split when you try to pull them out.
Category: Automotive