Bed spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers originally designed for the Creality CR6 bed but will fit other Creality printers like the ender3 series & CR10
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 272
- Wydruki
- 2
- Wyświetlenia
- 1539
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Bed spacers originally designed for the Creality CR6 to go between the bed and the carriage, but this will also fit most Creality printers from an ender to a cr10 and possibly a whole lot more brands of printer.
Printed in TPU at 0.2mm layer height. This is perfect material to make these from as will stay nice and strong even when your bed is heated up to 80°C and possibly up to 120 depending on the actual filament you have, but why you would need to heat your bed to 120 or if it even could I don't know
Dimensions are:
10mm wide
14mm heigh
4.5mm hole
A small cut out from the top allows for some compression whilst still keeping the whole thing nice and rigid so as to not have to keep re-leveling the bed constantly like with springs that move and slip easily.