Bike Tail Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by this https://www.thingiverse.com/thing:3091337 I decided to design my own light, that is easier to print.…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Inspired by this https://www.thingiverse.com/thing:3091337 I decided to design my own light, that is easier to print.
I made 2 versions in Fusion360, one to fix with fasteners below at the seat post and the other with an adapter to existing clip-on lights.
For the diffusor plate I used a transparent filament and scaled it a bit up in the slicer, because the first version kept falling out after a few rides.
I used a 5V LED strip and used XT-30 plugs for easy taking of, and then connected it to the existing light cable of my E-Bike.
You can probably also modify it to use some kind of battery for normal bikes.
Category: Sport & Outdoors