Bike Tail Light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by this https://www.thingiverse.com/thing:3091337 I decided to design my own light, that is easier to print.…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Inspired by this https://www.thingiverse.com/thing:3091337 I decided to design my own light, that is easier to print.
I made 2 versions in Fusion360, one to fix with fasteners below at the seat post and the other with an adapter to existing clip-on lights.
For the diffusor plate I used a transparent filament and scaled it a bit up in the slicer, because the first version kept falling out after a few rides.
I used a 5V LED strip and used XT-30 plugs for easy taking of, and then connected it to the existing light cable of my E-Bike.
You can probably also modify it to use some kind of battery for normal bikes.
Category: Sport & Outdoors