71 models
Designed for my 1997 crv. could work with others. sits in the rear light trim and is doublestick taped in. (3m foam tape) Changelog: V2: added a little strip at the bottom for better fit. Print Settings Printer Brand: Prusa Printer: I3…
The bulb holder on my E30 kept falling out, and upon realising the part was no longer available, I figured I'd recreate it. Part number is 63211376879. I printed at .2mm layer height, 100% infill, and used tree supports only touching the…
I was installing the Trailer Hitch for my Tesla Model 3. The first steps is removing the plastic octagon nuts on top of Taillight. It turns out I don't have wrench large enough to loose the nut. That's why I create a little handy tool to…
This is a taillight cover for a Jeep Wrangler JL (2018-present). If you want to attach it to your taillight you need to use strong double-sided tape as the JL doesn't have those outer screws. I have not printed this yet, and I'm a Blender…
These fill in the empty space below the taillights that is left when the rubber bumpers are removed. For assembly & mounting you will need (8) #10x1" sheet metal screws. Part “A” is the same for both sides. Part “B” is directional.
I got tired of paying $15-25 every time I had water get into my taillights for new gaskets, so I modeled this using my OEM one, and spent near that in prototype prints. The goal is to 'squish' it with the taillight housing so; Print in…
Light mount replacement to mount the taillight onto the EX30 after installing third party linkages (i.e. https://www.etsy.com/au/listing/1546093084/euc-t4-custom-suspension-dog-bones-dxf) The model should be printed in TPU and printed…
A slight update to DGP-Design and Pound's Grabcad Jeep CJ and YJ taillight housing. All I did was to deepen the holes for the lens screws so you won't have to drill them, add the hole for the wiring and added the rails for the separator…
I modified taillight for Rancher to use the lights from Aliexpress. There is main (5mm), brake (5mm), return (5mm) and turn (3mm) light. https://www.aliexpress.com/item/1005002257228043.html?spm=a2g0o.9042311.0.0.27424c4d4OeVGu
Update! I made a new version with no ribs and thick enough to have 2 top and 2 bottom layers and 3mm of infill. With honeycomb infill and transparent PETG it has a nice look. Taillight lens for Jeep CJ and YJ vehicles. May also fit…
Uses 4x OEM hardware. Recommended filament PETG or ASA (or better). 2 perimeters is fine, no supports needed.
I wanted a REALLY good lighting system for my bike and this collection of parts is quite unique. The Harbor Freight quad flood light is really bright, has the perfect pattern for use as a bike headlight, AND its really cheap! $21 at time…
easy to print Printing in red translucent PETG compatible models XL125R 1982 (C) XL125R 1985 (F) XL125S 1985 (F) FRANCE / KPH XL125S 1987 (H) FRANCE / KPH XL125S 1987 (H) FRANCE / KPH XL125SC 1987 (H) FRANCE / KPH XL125SC 1987 (H) FRANCE…
Gasket that goes under the tailight lens in Jeep CJ and YJ vehicles. Print in flexible like TPU. Fusion 360 file included so you can tweak it to your hearts content. Fits the taillight housing and the lens you'll find in my other things.…
This mount allows for the use of GoPro-style accessories on the back of the Tailfin AeroPack. The bolt holes are spaced to fit the "Light Mount (Fixed)" accessory by Tailfin. Two M5 x 12mm bolts, two M5 washers, and three M5 nuts are…
Cover for the taillight. For charging only Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Category: Automotive
Replacement clip / grommet to hold on the tail light of a 1st gen Tacoma
Ascher Taillight Mount for Bontrager Fender I assume this mount should fit other Bontrager Fender sizes. I encourage those interested to remix this part for any reason. IMPORTANT NOTE: You may need to adjust the print scale by 1 or 2…
Rear lights specifically designed for the WLtoys 12428 RC car. This model features a robust and easy-to-install structure, designed to house standard LEDs and improve the vehicle's visibility and realism during use. The design includes…
Printed in PETG. No support needed. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2 Infill: 7 % Category: Automotive
I bought the Specialized flash front and rear lights but could not find a way to mount this to the fender, so I made this part to do so. The light does not use the band to hold it on but instead snaps into place. When installing it may…
This are two "clones" (so to speak) of the Supernova Taillights. Both the smaller and the bigger M99 version. I know that Supernova uses some custom LEDs to get street legal, but in the end a small row of LEDs will not really blind anyone…
This is a simple taillight adapter for a Woom 5 children's bicycle equipped with a luggage rack. The standard Woom taillights you can order at their shop are made for the seat post and do not fit to the rack you can buy there as well. So…
I have a Tubus Airy rear rack on my bike, and I have kind of been wishing I could mount a Specialized Stix taillight to it in a clean fashion. This adapter clips onto 10mm tubing, and then is held in place using two M4 screws with M4x4…
It hooks in on one side and snaps into place on the other; I recommend printing it on its side, with supports, to prevent the hook from breaking, PETG works well
Taillight for bike designed to be clamped-mounted on seatpost (30.9 or 31.6mm diameter). Printed casing fits 4 eagle eye 22mm leds, 2 aiming straight back (red ones) and 2 above them at a slight angle intended to be used as turn signal…
The Delta Cycle Megarack Ultra rear bike rack has a strange back end makes it hard to mount a tail light securely. There's a thin metal tab sticking down with a couple of holes in it, as well as two vertical mounting holes on the rack top…
I pulled a design from grabcad and remade it into 2 4" round taillights and split the body for smaller 3d printers to handle it. Will include the .step file so you can either reassemble the split or modify/clean up the housing. Post a…
Replacement taillight screw cover for a 2005-2010 Honda Odyssey. This is for the screw covers under the rear tailgate.
3D Scan of a 1964 Chevy Corvair Taillight retainer bezel. The Holes are not completely cleaned up, but this scan should be printable if you wanted.
Had a friend halfway across the country with an older Winnebago - some kid threw a rock and hit the tail/reverse light. He sent me all the pieces and i designed a basic replacement. Want to resin cast replacements of originals, but needed…
the wire is passed through seatpost
This is a taillight lens for a 1964 Rambler Classic 660 printed with petg transparent red, still dialing in the settings
Small simple adapter to attach Taillight to bike rack reflector clip.
Die Laschen dieses Rücklichts brechen leicht ab. Die abgebrochenen Laschen müssen abgeschnitten oder weg gefeilt werden. Dann das Rücklicht einfach auf das Teil kleben. The tabs of this taillight break off easily. The broken tabs must be…
Bicycle Signal Holder CatEye LD610 Taillight front: cone frame ø50 ø60 150mm 16° rear: seatpost 30.8mm -16° https://www.aliexpress.com/item/4001119231828.html Category: Sport & Outdoors
An Adapter to mount an universal taillight (50mm hole distance) to the SKS infinity luggage rack.
This mount lets you attach a saddle-post taillight onto the back of a QuickTrack MTX 2.0 rear bike rack. It includes a mini-fender that serves as a flange to prevent the taillight from slipping off, and the fender also protects the…
Fixing up a 1969 Camper Trailer. Won't be on the road much but still needs working tail lights for the look. Not DOT Approved. These are slightly larger, and much more stylish than the originals. My install has small LED lights for…
A replacement holder for the Pedal Nation bike taillight. This holder uses a rubber strap to attach to the seat post. Category: Sport & Outdoors
I bought cheap 3 leds modules and added in sets of 3, connected them in parallel and got this LED headlamps that are very bright and usefull.
Wasn't found of the grille decal, and wanted something different than the usual grille. It's fully open to see the motor behind, with room for a pair of 5mm leds. No glass, just the plain leds. I glued is with double-sided tape. Same for…
Universal ESK8/Skateboard/Longboard Accessory Mount This mount is designed for skateboards and longboards to support accessories that typically use standard bicycle handlebar mounts , including headlights, taillights, and action cameras.…
My attempt at a clone of https://www.tailfin.cc/us/product/accessories/rack-aeropack-accessories/seatpost-mimic-light-mount/ Takes an M5 screw for both pivot point and attachment point. I only had 25mm M5's on hand. I made one that takes…
Basic cylindrical mount for attaching a taillight under your saddle. Designed to work with 2x M5 low-profile nylock nuts 2x M5x20mm socket cap screws Simply clamp onto your saddle rails and attach the taillight. I personally use this with…
The original strap that came with my Cygolite Hotrod was too long for attaching to my seat stay and I did not want to cut the strap. The extra length would obscure the light, so I recreated the strap with a shorter length in TPU. Printed…
Taillight for KingKong RC Lurker. To be printed clear or translucent of course. Snaps into place (a bit on the tight fit side) Category: R/C Vehicles
CZ: Tento univerzální držák slouží pro upevnění světel s klasickým upínacím mechanismem pomocí gumičky a také pro upevnění světel/radarů Garmin Varia nebo Bryton Gardia pomocí upevňovací základny (dostupná např. na Aliexpressu). Držák je…
Dummy taillight to fit Vespa PX150 and its clones, anything with 95mm on center bolt holes. Modeled after the '60s Vespa "Acorn" taillights but not really a reproduction of anything specific. Probably don't want this on a street bike…
Print face down with supports on built plate. Uses 2x M4x12mm screws, washers, bolts to secure it along with the original included hardware.
This should be a mostly accurate reproduction of 92075-091. I didnt have a pristine version to work from, but it worked well enough for me. Currently installed on my bike. Sharing on the off chance that 3d printing and vintage bike…
This is a mount for the taillight with a brake light function, designed to be attached to the seatpost. It is secured using cable ties. I used PETG for printing and didn't use any special settings. There is some shrinking with PETG, which…
I have a bicycle taillight with a very sensitive power button that makes it really easy to accidentally turn on. It can happen when it's just sitting in my coat pocket. By the time I realize it's on, half the battery is gone. So I…
Adapter for Super Nova Taillight and porter Infill 100% PLA
You need additional M5 hex bolts, washers and nuts for mounting the adapter to the bicycle rack. And of course washers and nuts for mounting the taillight to the adapter. needed it for my busch + müller toplight line taillight
Hey Folks, I wanted to have a brakelight on my bike. I decided to choose the Supernova TL3 pro. Due to the fact that I don't wanted to make some new holes in my bike and I can't replace the previous tail light as it was mounted on the…
Connectors that fit into the Harness of a EU C6 Corvette - allows to connect different Lights/Sockets without modifying the OE harness. Named Grey/Brown indicate which harness conecctor they are for (different keying). Fit AMP Superseal…
This is to plug a hole, behind the rear taillights, that comes from the factory covered in tape. The tape can degrade and may leak after years of use. This part should snap-fit into the hole, but also add RTV on the interior flange, and…
Amazon.com : BlyilyB 12-80V Dual Color Motorcycle Scooter Amber Color For Turn Signals and Red Color For Tail Light Brake Stop Light Lamp (Pack of 1) : Automotive
This bracket allows you to relocate the taillight to the back of the rack. Normally it is mounted under the seat, I had to extend the 3-wire cable for it to reach. A spot of construction adhesive before clipping it onto the rail will…
I printed this gasket out of Overture TPU on a Prusa XL with a .6OSB nozzle.
An adaptor for this taillight https://a.co/d/0dinXTwZ to work with this rack https://a.co/d/00KZFXdF . It uses 2 M6 Screws of at least 12mm and their respective nuts.
Attach your ROCKBROS Q5 taillight to your Ergon saddle via QuickClick mount. Separate the threaded piece that holds the light to the saddle rails or seatpost and attach using the two holes provided in the model. Printed using 20% infill,…
Plugs the bulb opening in the back of the OBS Ford composite headlight housing while the bulb is out. Use it to keep dust, moisture and bugs out during storage, or to seal the housing while you clean or restore it. It twists in like the…
Replacement clip / grommet to hold on the tail light of a 1st gen Tacoma
This is to plug a hole, behind the rear taillights, that comes from the factory covered in tape. The tape can degrade and may leak after years of use. This part should snap-fit into the hole, but also add RTV on the interior flange, and…
This is a mount for the taillight with a brake light function, designed to be attached to the seatpost. It is secured using cable ties. I used PETG for printing and didn't use any special settings. There is some shrinking with PETG, which…
Hey Folks, I wanted to have a brakelight on my bike. I decided to choose the Supernova TL3 pro. Due to the fact that I don't wanted to make some new holes in my bike and I can't replace the previous tail light as it was mounted on the…
Universal ESK8/Skateboard/Longboard Accessory Mount This mount is designed for skateboards and longboards to support accessories that typically use standard bicycle handlebar mounts , including headlights, taillights, and action cameras.…
I pulled a design from grabcad and remade it into 2 4" round taillights and split the body for smaller 3d printers to handle it. Will include the .step file so you can either reassemble the split or modify/clean up the housing. Post a…
