1 / 4
OBS Ford Taillight Bulb Hole Plug - 9007 / HB5 Twist-Lock Cap (1992-1997 F-Series & Bronco) — image 1
1 / 4

OBS Ford Taillight Bulb Hole Plug - 9007 / HB5 Twist-Lock Cap (1992-1997 F-Series & Bronco)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Twist-lock plug for the 9007/HB5 bulb hole on OBS Ford headlights. Keeps dust and bugs out during storage or cleaning.

Rating
0 / 5
Likes
2
Downloads
2
Makes
0
Views
19
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Plugs the bulb opening in the back of the OBS Ford composite headlight housing while the bulb is out. Use it to keep dust, moisture and bugs out during storage, or to seal the housing while you clean or restore it.

It twists in like the factory 9007 bulb: line up the 3 keyed tabs, push it in, and turn it to lock. Turn it with the slot on the face, using a flat screwdriver or a coin.

FITS

The 9007 / HB5 (PX29t) twist-lock bulb opening. Tested on a 1997 F-250. It should fit other headlight housings that take 9007 bulbs, but test-fit first. 1987-1991 trucks use 9004 bulbs and are not tested.

SIZE

43 mm cap. The twist-lock body is 29.3 mm, 31.3 mm across the tabs, and 5.4 mm deep.

PRINT SETTINGS

PETG recommended. I used Sunlu PETG HS at 0.12 mm layers, 3 walls and 15% gyroid infill. Print it face-down (flange flat on the bed), with small tree supports only under the inner ledge. It takes about 18 minutes. Print two, one for each headlight.

Tags